Camera Installation Help

Scenario A.) Backup Camera Configuration Only
(When Installing To Only Operate Camera During Reverse)
1.PT1 and Camera 12v+ to Reverse Lamp
2.PT3 to Monitor Reverse Trigger (Input)
3.Ground Camera to Vehicle Chassis
4.PT2, PT4 Not Used Tape Up
(When Installing To Only Operate Camera During Reverse)
1.PT1 and Camera 12v+ to Reverse Lamp
2.PT3 to Monitor Reverse Trigger (Input)
3.Ground Camera to Vehicle Chassis
4.PT2, PT4 Not Used Tape Up
Scenario B.) ACC/IGN Camera Configuration
(Powering the Camera To Be On At All Times, Not In Only Reverse)
1.PT1 to Reverse Lamp
2.PT2 to Camera 12v+
3.PT3 to Monitor Reverse Trigger (Input)
4.PT4 to ACC/IGN Output
5.Ground Camera to Vehicle Chassis
(Powering the Camera To Be On At All Times, Not In Only Reverse)
1.PT1 to Reverse Lamp
2.PT2 to Camera 12v+
3.PT3 to Monitor Reverse Trigger (Input)
4.PT4 to ACC/IGN Output
5.Ground Camera to Vehicle Chassis
Scenario C.) Front Camera Configuration
(Powering the Camera To Be On At All Times)
1.PT2 to Camera 12v+
2.PT4 to ACC/IGN Output
3.Ground Camera to Vehicle Chassis
(Powering the Camera To Be On At All Times)
1.PT2 to Camera 12v+
2.PT4 to ACC/IGN Output
3.Ground Camera to Vehicle Chassis
** Any Addtional Questions, Please Contact [email protected] or 310.787.7880