Blind Spot Safety Systems

BSS2x Sensor Kit

BSS2x -- Microwave 2-way Radar Blind Spot Detection System

BSS2x Hardware

Key Features

  • High Accuracy Digital Microwave Radar Technology
  • Two color options for LED indicators for visual alerts
  • Adjustable buzzer speaker for audible alerts
  • Self speed sensing, does not require sensors or GPS
  • No drilling required
  • Not applicable with metal bumpers (See BSS1LPB)
  • Cross Traffic Alerts while Reversing


Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

Our newest Radar Blind Spot System is based on microwave radar technology for extended distance and sensitivity. BSS2x adds an extra set of eyes and warns the driver if there are any vehicles in either blind spot before or during a lane change maneuver. This system is first to market with 2-way detection with self-speed sensing, giving you alerts for vehicles not only approaching but also the vehicles you may be passing. BSS2x is first to market with features like using state of the art technology to detect vehicles speed and only give audible and visual alerts when traveling 13 mph or greater. Radar sensors install behind the bumper with included metal brackets and tools to insure correct angles are set. Two compact black or grey LED’s come included in each kit for visual alerts along with a hideaway adjustable buzzer for the audible alerts.

Kit also includes newly revised “Reverse Cross Traffic Alerts” for backing/reversing out of a tight space when visibly is limited while vehicles are approaching from left or right side.


Manuals / Guides

BSS2x — Microwave 2-way Radar Blind Spot Detection System
Download


Specifications

Sensor Operating Frequency
24GHz
Transmit Power
15dbm
Detection Ability
5 targets can be detected at the same time
Detection Speed Range
-22.5 mph to 50 mph
Speed Accuracy
< 0.5 mph
Speed Restriction
The system will be only activated at the speed over 13 mph
Direction of Movement
Approached or overtaken by vehicles
Operating Voltage
8V to 30V
Waterproof (Radar Sensor)
Radars: IP67 / Cables: NOT waterproof
Working Current
< .4A
Working Temperature
-20°C — +70°C
Installation Angle
35° (Horizontal)
Gain
12k

In the Box

  • Main Wire Harness & Extension Cables
  • Radar Sensor(s)
  • LED Indicators Gray Housing
  • LED Indicators Black Housing
  • Adjustable Buzzer
  • Radar Puck Bracket
  • Installation Angle Finding Tool
  • Velcro, Screws and Other Hardware
  • Owner’s Manual And Warranty Information

Videos


CM-D700 -- Dual Side View Blind Spot Cameras

CM-D700 Camera

Key Features

  • Easy Mount Universal Cameras with HD CMOS IV Sensor & NightVision™ Technology 
  • Under Side Mirror Installation for Enabling to See Blind Spots 
  • Resolution (TV LINES): 480
  • Minimum illumination: <0.3Lux
  • Angle: 170°
  • IP67-IP68
  • Turn Signal Trigger (Voltage Regulator) Module Included for 2 Cameras
  • Dimensions: L(1.18) x W(0.75) x H(1.34) inches

Find a Local DealerNeed Help? Call Our Sales Team 1-877-777-8811

Share using

Details

The CM-D700 Dual Side View Blind Spot Cameras are an upgraded version of our CM-D500 model. This camera kit comes with two cameras for both sides of your vehicle and comes with a number of features to help eliminate blind spot accidents and threats.

The CM-D700 mounts directly under your side mirrors, giving you perfect visual access to blindspots, and leaving your car free of unwanted external modifications on the body. The dual side blind spot cameras come in a water-proof housing, and work in almost black lighting, ensuring you can see in almost any situation needed. A standard color resolution output, partnered with a viewable angle of 170°, ensures that you get the best possible visual on your surroundings as well.


Manuals / Guides

CM-D700 — Dual Side View Blind Spot Cameras
Download 


Specifications

Sensor:
1/4 CMOS
Resolution:
316(H) x 224(V)
TV Line:
480
Lens
1.7mm
Min illumination:
<0.3 Lux
Video system:
NTSC (Color)
Body color:
Black (B)
Waterproof:
IP67 – IP68
View angle:
170°
Voltage & current consumption
Range of operational voltage: 9 ~ 16V; Max operational circuit: 90mA
Operation temp.:
-22º+149º
Storage temp.:
-40º~ +105º

In the Box

  • Rydeen Camera
  • Power Wire Harness
  • Owner’s Manual
  • Warranty Card

CM-SIDE Blindspot Camera

CM-SIDE -- Side/Front/Rear View Blind Spot Camera

CM-SIDE Blindspot Camera

Key Features

  • Resolution (TV LINES): 480
  • Minimum illumination: <0.3Lux
  • Angle: 170°
  • IP67- IP68
  • Image: Mirror / Standard Selectable
  • Selectable Assist Guidance Line

Find a Local DealerNeed Help? Call Our Sales Team 1-877-777-8811

Share using

Details

 

The CM-SIDE Extra Small Backup Camera is one of the smallest vehicle backup cameras on the market. The small profile of the camera allows it to be mounted in various places on a car or truck, and can be used as a front facing or rear backup camera. The camera comes with double sided tape, as well as short metal screws to make installation as easy as possible. Once it is mounted, the camera can be adjusted  for optimal viewing depending on the vehicle. It includes a high quality CMOS Image Sensor, Night Time Visibility, and a Assist line function.

The camera itself comes in a black, waterproof casing with an IP67-IP68 rating, 170° viewable angle, and a full color standard resolution display to assist with blind spot visibility. This high-tech backup camera is a perfect choice where low visual impact on the vehicle is desired.


Manuals / Guides

CM-SIDE — Side View Blind Spot Camera
Download 


Specifications

Sensor:
1/4 CMOS
Resolution:
316(H) x 224(V)
TV Line:
480
Lens
1.7mm
Min illumination:
<0.3 Lux
Video system:
NTSC (Color)
Body color:
Black (B)
Waterproof:
IP67 – IP68
View angle:
170°
Voltage & current consumption
Range of operational voltage: 9 ~ 16V; Max operational circuit: 90mA
Operation temp.:
-22º+149º
Storage temp.:
-40º~ +105º

In the Box

  • Rydeen Camera
  • Power Wire Harness
  • Owner’s Manual
  • Warranty Card

BSS2LPBC -- Advanced License Plate Bar Blindspot Detection System

BSS2LPBC Example

Key Features

  •  High Accuracy Digital Microwave Radar Technology
  •  Two LED indicators for visual warning
  •  Adjustable buzzer speaker for audio warning
  •  GPS Antenna Included for Speed Sensing
  •  No drilling OR removal of bumper required
  •  Applicable for metal bumper vehicles
  •  Built-In HD Camera 
  •  Cross Traffic Alerts while Reversing
  •  All Types Of Vehicles: (Trucks, Cars, Commercial Vehicles)


Find a Local DealerNeed Help? Call Our Sales Team 1-877-777-8811

Share using

Details

BSS2LPBC Radar Blind Spot “BAR” is based on microwave radar technology for extended distance and sensitivity. BSS2LPBC adds an extra set of eyes and warns the driver if there are any vehicles approaching in either blind spot before and during a lane change maneuver. Our system uses GPS to initiate operation above 20 MPH eliminating potential fault alerts. Unlike other systems, it requires no drilling or removal of vehicles bumpers.

The Radar Sensor “BAR” installs top or bottom of tag/license plate and alerts the driver with two compact LED Indicators mounted on the “A” Pillars and a small hideaway speaker. This Microwave system is more accurate than previous ultrasonic based sensor solutions from other companies.

Kit also includes built-in HD backup camera, so while in revere taking convenience of kits “Reverse Cross Alert” you can also see what is directly behind your vehicle.

(Monitor sold separately, see Stand Alone Monitors or Mirror Monitor Solutions.)


Manuals / Guides

BSS2LPBC — License Plate Bar Microwave Radar Blindspot Detection System w/Camera
Download


Specifications

Detection range
52 degree (Horizontal)
Speed range
1 mph — 137 mph
Speed accuracy
< 1 mph
Speed Restriction
1. The GPS needs to detect +20mph to activate the sensors
(there are 4 speed restriction option : 15 mph, 20 mph, 25 mph,30 mph. Default is 20mph).
Please see below (from 1-4 switch, it could control 4 speed restriction)
Switch 1=15 mph
Switch 2=20 mph
Switch 3=25 mph
Switch 4=30 mph.
2. If no GPS signal is detected or satellites not found, the system will be activated at any speed
Direction of movement
Approached or overtaken by vehicles
Detection range
Truck : 1ft-80ft
Car : 1ft-65ft
Motorcycle:1ft-50ft
Pedestrian:1ft-45ft
Operating Voltage
9—18V
Waterproof
Radars: IP67 / Cables: NOT waterproof
Working current
< 100mA
Working temperature
-20°C ~ + 70℃


In the Box

  • Main Unit
  • Harness and Extension Cable
  • BSS Bar with two sensors built inside and camera
  • LED Indicators Gray Housing
  • LED Indicators Black Housing
  • GPS Antenna
  • Adjustable Buzzer
  • Velcro
  • Screws & L-Tool


Videos


BSS2 Equipment

BSS2 -- Microwave Radar Blind Spot Detection System

BSS2 Gear

Key Features

  • High Accuracy Digital Microwave Radar Technology
  • Two color options for LED indicators for visual alerts
  • Buzzer speaker for audible alerts
  • GPS Antenna Included for Speed Sensing
  • No drilling required
  • Not applicable with metal bumpers (See BSS1LPB)
  • Cross Traffic Alerts while Reversing


Find a Local DealerNeed Help? Call Our Sales Team 1-877-777-8811

Share using

Details

The Radar Blind Spot System is based on microwave radar technology for extended distance and sensitivity. Our BSS2 kit adds an extra set of eyes and warns the driver if there are any vehicles approaching in either blind spot before and during a lane change maneuver. Our system uses GPS to initiate operation above 20 MPH eliminating potential fault alerts. Unlike other systems, it requires no drilling into the bumpers. Radar Sensors install behind the bumpers hidden with included metal bracket hardware and alert the driver with two compact LED Indicators mounted on the “A” Pillars and a small hideaway adjustable speaker. This Microwave system is more accurate than previous ultrasonic based sensor solutions from other companies.

Kit also includes newly revised “Cross Traffic Detection Alert” for backing/reversing out of a tight space when visibility is limited while vehicles coming down isle.


Manuals / Guides

BSS2 — Microwave Radar Blind Spot Detection System
Download


Specifications

Sensor Operating Frequency
24GHz
Transmit Powery
15dbm
Detection Ability
5 targets can be detected at the same time
Detection Speed Range
0.5mph—137mph
Speed Accuracy
< 0.5mph
Speed Restriction
1. There are 4 speed restriction options; 5 mph, 10 mph, 15 mph, 20 mph. Default is 20 mph.
2. If no GPS signal is detected or satellites not found, the system will be active at any speed.
Direction of Movement
Approached or overtaken by vehicles
Operating Voltage
9—18V
Waterproof (Radar Sensor)
Radars: IP67 / Cables: NOT waterproof
Working Current
< 200mA
Working Temperature
-20°C — +70°C
Installation Angle
20°(Horizontal)
Gain
12k


In the Box

  • Main Control Box
  • Main Wire Harness & Extension Cables
  • Radar Pucks/Bar
  • Black and Grey LED Indicators
  • Adjustable Buzzer For Audible Notifications
  • GPS Antenna For Low Speed Notification Lock Out
  • Velcro, Screws and Other Hardware
  • Owner’s Manual And Warranty Information


Videos


BSS2LPB System

BSS2LPB -- License Plate Bar Microwave Radar Blindspot Detection System

BSS2LPB Unit

 

Key Features

  • High Accuracy Digital Microwave Radar Technology
  • Two LED indicators for visual warning
  • Buzzer speaker for audio warning
  • GPS Antenna Included for Speed Sensing
  • No drilling or removal of bumper required
  • Applicable for metal bumper vehicles (pickup trucks)
  • Cross Traffic Alerts while Reversing
  • Works On All Types Of Vehicles: Trucks, Cars, Vans, Commercial Vehicles 


Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSS2LPB Radar Blind Spot “BAR” is based on microwave radar technology for extended distance and sensitivity. BSS2LPB adds an extra set of eyes and warns the driver if there are any vehicles approaching in either blind spot before and during a lane change maneuver.

Our system uses GPS to initiate operation above 20 MPH eliminating potential fault alerts. Unlike other systems, it requires no drilling or removal of vehicles bumpers. Radar Sensor “BAR” installs top or bottom of tag/license plate and alerts the driver with two compact LED Indicators mounted on the “A” Pillars and a small hideaway speaker.

This Microwave system is more accurate than previous ultrasonic based sensor solutions from other companies.

The kit also includes “Cross Traffic Detection Alert” for backing out of a tight space where you cannot see vehicles coming down isle before it’s too late.


Manuals / Guides

BSS2LPB — License Plate Bar Microwave Radar Blindspot Detection System
Download


Specifications

Detection range
52 degree (Horizontal)
Speed range
0.5mph—137mph
Speed accuracy
< 0.5mph
Speed Restriction
1. The GPS needs to detect +20mph to activate the sensors
(there are 4 speed restriction option : 15 mph, 20 mph, 25 mph,30 mph. Default is 20mph).
Please see below (from 1-4 switch, it could control 4 speed restriction)
Switch 1=15 mph
Switch 2=20 mph
Switch 3=25 mph
Switch 4=30 mph.
2. If no GPS signal is detected or satellites not found, the system will be activated at any speed
Direction of movement
Approached or overtaken by vehicles
Detection range
Truck : 1ft-80ft
Car : 1ft-65ft
Motorcycle:1ft-50ft
Pedestrian:1ft-45ft
Operating Voltage
9—18V
Waterproof
Radars: IP67 / Cables: NOT waterproof
Working current
< 100mA
Working temperature
-20°C ~ + 70℃


In the Box

  • Main Unit
  • Harness and Extension Cable
  • BSS Bar with two sensors built inside
  • LED Indicator Gray Housing
  • LED Indicator Black Housing
  • GPS Antenna
  • Adjustable Buzzer
  • Velcro
  • Screws & L-Tool


Videos


CM Switcher Kit

CM-Switcher -- 3 Way Video Switching System for In-dash Multimedia

- Made For CM-D700 Dual Blind Spot and Reverse Camera to In-dash Multimedia Units - Multiple Camera / Trigger Inputs - 1 video output and included 12v trigger output - Works with OE or aftermarket radio (OE requires interface) - Priority override for backup camera signal - Provides reverse camera output trigger for aftermarket radios/screens ** Tech Bulletin Switcher  
PSK4Flush Feature

PSK4 Flush — Digital Sensor Heads (Flush Surface)

PSK4 Flush Sensor Heads

Key Features

  • Add on Sensors (Flush Surface Type 4 pieces)
  • Sensors have a high accuracy 6 foot sensing distance
  • Sensing start position adjustable according to installation location
  • 3 beeping tones based on distance of object (slow beep at 3 feet, rapid beep at 2 feet and solid tone at 1 foot or less)

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

PSR4000 -- Digital Ultrasonic Parking Sensors

PSR4000 Parking Sensor

Key Features

  • Direction/Distance indicator (LED display or hideaway adjustable speaker)
  • Highly sensitive digital sensors (2-3ft front configuration, 6-8ft rear configuration)
  • Instantly turns on with reverse gear selection
  • Paintable sensors (painting mask included)
  • Metal or Plastic Bumpers

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

Rydeen digital ultrasonic parking sensors provide coverage behind and/or front of the vehicle. When an object is detected in the area the driver will be alerted inside the vehicle with distinct warning tones from slow beeps, to rapid beeps and then solid tone. The kit comes standard with (4) digital sensor heads that can be used for Front and/or Rear applications.


Manuals / Guides

PSR4000 — Digital Ultrasonic Parking Sensors
Download Coming Soon


Specifications

Coming soon


In the Box

  • Main control box
  • Ultrasonic sensors (4 digital sensors)
  • Sensor cable extensions provided
  • LED Display with Internal Speaker
  • Adjustable hideaway buzzer
  • Drill/Hole-saw bit
  • Users manual
  • Accessories