CUB

VS-95A013 Featured

VS-95A013 -- Motorcycle Blindspot Detection System

VS-95A013 Main

Key Features

  • Compatible with nearly any type of motorcycle
  • Easy to mount on rear of the motorcycle
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blindspot Detection)

  • BSD is automatically activated when the motorcycle is started
  • The warning zone of the system covers left and right adjacent lanes with up to 30 ft range
  • LED indicator lamps will illuminate to notify the rider of a vehicle in the motorcycle blindspots. This will increase rider awareness to surrounding traffic conditions
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change
  • The warning zone of the system covers left and right adjacent lanes that would not allow for a safe lane change
  • LED indicator lamps will flash to notify the rider of a vehicle in the blindspots during lane change, in addition to haptic feedback to the seat to ensure confirmation of the condition. This will reduce accidents due to missed vehicles

VS-95A005S Featured

VS-95A005SB-CU -- 2016-2017 Chevrolet Silverado 1500 Tail Light BSD Kit

VS-95A005S Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A005SA-CU – 2014-2015 Chevy Silverado 1500 Tail Lamp Integrated BSD
VS-95A005SB-CU – 2016-2017 Chevy Silverado 1500 Tail Lamp Integrated BSD


VS-95A004FA-CU Featured

VS-95A004FB-CU -- 2018-2019 Ford F-150 Tail Light BSD Kit

VS-95A004FA-CU Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A004FA-CU – 2015-2017 Ford F-150 Tail Lamp Integrated BSD
VS-95A004FB-CU – 2018-2019 Ford F-150 Tail Lamp Integrated BSD


VS-95A015 Featured

VS-95A015 -- Universal Blindspot Detection Kit

VS-95A015 Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

RV Blindspot For Box Trucks

  • Easy to mount on the truck’s exterior
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 Tested for years of durability in the sun
  • Breakaway model available for extra wide applications
  • Automotive grade weathertight connectors and wiring

Blindspot Detection (BSD) 

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

Lane Change Alert (LCA)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

VS-95A005S Featured

VS-95A005SA-CU -- 2014-2015 Chevrolet Silverado 1500 Tail Light BSD Kit

VS-95A005S Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A005SA-CU – 2014-2015 Chevy Silverado 1500 Tail Lamp Integrated BSD
VS-95A005SB-CU – 2016-2017 Chevy Silverado 1500 Tail Lamp Integrated BSD


VS-95A010D Featured

VS-95A010DA-CU -- 2014-2017 Dodge Ram 1500 Tail Light BSD Kit

VS-95A010D Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range


VS-95A004FA-CU Featured

VS-95A004FA-CU -- 2015-2017 Ford F-150 Tail Light BSD Kit

VS-95A004FA-CU Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A004FA-CU – 2015-2017 Ford F-150 Tail Lamp Integrated BSD
VS-95A004FB-CU – 2018-2019 Ford F-150 Tail Lamp Integrated BSD


VS-95A042 Featured

VS-95A042 -- RV Motorhome BSD Kit

VS-95A042 Main

Key Features

  • RV Blind Spot For Motorhomes
  • Lane Change Alert (LCA)
  • Rear Cross Traffic Alert (RCTA)

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

RV Blind Spot For Motorhomes

  • Easy to mount on the motorhome exterior
  • Available with trailer in tow option
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 Tested for years of durability in the sun
  • Breakaway model available for extra wide applications
  • Automotive grade weathertight connectors and wiring

Lane Change Alert (LCA)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

Rear Cross Traffic Alert (RCTA)

  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Manuals / Guides

VS-95A042 — Motorhome BSD Kit
Download


Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your towable.

VS-95A042-E – RV Motorhome BSD Kit w/ 55ft cable ADI
VS-95A042-D – RV Motorhome BSD Kit w/ 40ft cable ADI
VS-95A042-C – RV Motorhome BSD Kit w/ 35ft cable ADI
VS-95A042-B – RV Motorhome BSD Kit w/ 30ft cable ADI
VS-95A042-A – RV Motorhome BSD Kit w/ 25ft cable ADI


Videos


VS-95A009 Featured

VS-95A009 -- RV Towable BSD Kit

VS-95A009

Key Features

  • RV Blind Spot For Trailers / Towables
  • Blind Spot Detection (BSD)
  • Lane Change Alert (LCA)

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

RV Blind Spot For Trailers / Towables

  • Easy to mount on the trailer exterior
  • Compatible with nearly any type of trailer including 5th wheeler
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 Tested for years of durability in the sun
  • Breakaway model available for extra wide applications
  • Automotive grade weathertight connectors and wiring

Blind Spot Detection (BSD) 

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

Lane Change Alert (LCA)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

Manuals / Guides

VS-95A009 — RV Towable BSD Kit
Download


Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your towable.

VS-95A009E – RV Towable BSD Kit w/ 40ft cable ADI
VS-95A009D – RV Towable BSD Kit w/ 35ft cable ADI
VS-95A009C – RV Towable BSD Kit w/ 30ft cable ADI
VS-95A009B – RV Towable BSD Kit w/ 25ft cable ADI
VS-95A009A – RV Towable BSD Kit w/ 20ft cable ADI
VS-95A009 – RV Towable BSD Kit w/ 22ft cable ADI


Videos