Tail Lamp

Details

BSD (Blindspot Detection)

• BSD is automatically activated when the motorcycle is started
• The warning zone of the system covers left and right adjacent lanes with up to 30 ft range
• LED indicator lamps will illuminate to notify the rider of a vehicle in the motorcycle blindspots. This will increase rider awareness to surrounding traffic conditions
• The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

• LCA is activated when the turn signals are used to make a lane change
• The warning zone of the system covers left and right adjacent lanes that would not allow for a safe lane change
• LED indicator lamps will flash to notify the rider of a vehicle in the blindspots during lane change, in addition to haptic feedback to the seat to ensure confirmation of the condition. This will reduce accidents due to missed vehicles

Details

BSD (Blind Spot Detection)

• BSD is automatically activated when the vehicle exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with over 75 ft range
• The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
• The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

• LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
• An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

• RCTA is activated when the vehicle is placed in ‘reverse’
• An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
• The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A005SA-CU – 2014-2015 Chevy Silverado 1500 Tail Lamp Integrated BSD
VS-95A005SB-CU – 2016-2017 Chevy Silverado 1500 Tail Lamp Integrated BSD

Details

BSD (Blind Spot Detection)

• BSD is automatically activated when the vehicle exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with over 75 ft range
• The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
• The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

• LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
• An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

• RCTA is activated when the vehicle is placed in ‘reverse’
• An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
• The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A004FA-CU – 2015-2017 Ford F-150 Tail Lamp Integrated BSD
VS-95A004FB-CU – 2018-2019 Ford F-150 Tail Lamp Integrated BSD

Details

RV Blindspot For Box Trucks

• Easy to mount on the truck’s exterior
• All parts are available as service parts for replacement if damaged
• ASTM D4329 Tested for years of durability in the sun
• Breakaway model available for extra wide applications
• Automotive grade weathertight connectors and wiring

Blindspot Detection (BSD) 

• BSD is automatically activated when the vehicle exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with over 75 ft range
• The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
• The CUB BSD system complies with the ISO 17387 Type 3 system standards

Lane Change Alert (LCA)

• LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
• An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

Details

BSD (Blind Spot Detection)

• BSD is automatically activated when the vehicle exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with over 75 ft range
• The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
• The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

• LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
• An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

• RCTA is activated when the vehicle is placed in ‘reverse’
• An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
• The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A005SA-CU – 2014-2015 Chevy Silverado 1500 Tail Lamp Integrated BSD
VS-95A005SB-CU – 2016-2017 Chevy Silverado 1500 Tail Lamp Integrated BSD

Details

BSD (Blind Spot Detection)

• BSD is automatically activated when the vehicle exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with over 75 ft range
• The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
• The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

• LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
• An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

• RCTA is activated when the vehicle is placed in ‘reverse’
• An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
• The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Details

BSD (Blind Spot Detection)

• BSD is automatically activated when the vehicle exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with over 75 ft range
• The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
• The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

• LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
• The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
• An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

• RCTA is activated when the vehicle is placed in ‘reverse’
• An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
• The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A004FA-CU – 2015-2017 Ford F-150 Tail Lamp Integrated BSD
VS-95A004FB-CU – 2018-2019 Ford F-150 Tail Lamp Integrated BSD