Archives Products

VS-95A013 Featured

VS-95A013 -- Motorcycle Blindspot Detection System

VS-95A013 Main

Key Features

  • Compatible with nearly any type of motorcycle
  • Easy to mount on rear of the motorcycle
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blindspot Detection)

  • BSD is automatically activated when the motorcycle is started
  • The warning zone of the system covers left and right adjacent lanes with up to 30 ft range
  • LED indicator lamps will illuminate to notify the rider of a vehicle in the motorcycle blindspots. This will increase rider awareness to surrounding traffic conditions
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change
  • The warning zone of the system covers left and right adjacent lanes that would not allow for a safe lane change
  • LED indicator lamps will flash to notify the rider of a vehicle in the blindspots during lane change, in addition to haptic feedback to the seat to ensure confirmation of the condition. This will reduce accidents due to missed vehicles

Manuals / Guides

VS-95A013 — Motorcycle Blindspot Detection System
Install Guide – Download
Operations Guide – Download


VS-95A005S Featured

VS-95A005SB-CU -- 2016-2017 Chevrolet Silverado 1500 Tail Light BSD Kit

VS-95A005S Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Manuals / Guides

VS-95A005SB-CU — 2016-2017 Chevrolet Silverado 1500 Tail Light BSD Kit
Install Guide – Download
Operations Guide – Download


Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A005SA-CU – 2014-2015 Chevy Silverado 1500 Tail Lamp Integrated BSD
VS-95A005SB-CU – 2016-2017 Chevy Silverado 1500 Tail Lamp Integrated BSD


VS-95A004FA-CU Featured

VS-95A004FB-CU -- 2018-2019 Ford F-150 Tail Light BSD Kit

VS-95A004FA-CU Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Manuals / Guides

VS-95A004FB-CU — 2018-2019 Ford F-150 Tail Light BSD Kit
Install Guide – Download
Operations Guide – Download


Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A004FA-CU – 2015-2017 Ford F-150 Tail Lamp Integrated BSD
VS-95A004FB-CU – 2018-2019 Ford F-150 Tail Lamp Integrated BSD


VS-95A015 Featured

VS-95A015 -- Class B Motorhomes / Passenger Vehicles (Universal)

VS-95A015 Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

RV Blindspot For Box Trucks

  • Easy to mount on the truck’s exterior
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 Tested for years of durability in the sun
  • Breakaway model available for extra wide applications
  • Automotive grade weathertight connectors and wiring

Blindspot Detection (BSD) 

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

Lane Change Alert (LCA)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

Manuals / Guides

VS-95A015 — Class B Motorhomes / Passenger Vehicles (Universal)
Install Guide – Download
Operations Guide – Download


VS-95A005S Featured

VS-95A005SA-CU -- 2014-2015 Chevrolet Silverado 1500 Tail Light BSD Kit

VS-95A005S Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Manuals / Guides

VS-95A005SA-CU — 2014-2015 Chevrolet Silverado 1500 Tail Light BSD Kit
Install Guide – Download
Operations Guide – Download


Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A005SA-CU – 2014-2015 Chevy Silverado 1500 Tail Lamp Integrated BSD
VS-95A005SB-CU – 2016-2017 Chevy Silverado 1500 Tail Lamp Integrated BSD


VS-95A010D Featured

VS-95A010DA-CU -- 2014-2017 Dodge Ram 1500 Tail Light BSD Kit

VS-95A010D Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Manuals / Guides

VS-95A010DA-CU — 2014-2017 Dodge Ram 1500 Tail Light BSD Kit
Install Guide – Download
Operations Guide – Download



VS-95A004FA-CU Featured

VS-95A004FA-CU -- 2015-2017 Ford F-150 Tail Light BSD Kit

VS-95A004FA-CU Main

Key Features

  • Easy to install, plug and play
  • DOT approved
  • Factory appearance 
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 tested for years of durability in the sun

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

BSD (Blind Spot Detection)

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

LCA (Lane Change Alert)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

RCTA (Rear Cross Traffic Alert)

  • RCTA is activated when the vehicle is placed in ‘reverse’
  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Manuals / Guides

VS-95A004FA-CU — 2015-2017 Ford F-150 Tail Light BSD Kit
Install Guide – Download
Operations Guide – Download


Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your vehicle.

VS-95A004FA-CU – 2015-2017 Ford F-150 Tail Lamp Integrated BSD
VS-95A004FB-CU – 2018-2019 Ford F-150 Tail Lamp Integrated BSD


VS-95A042 Featured

VS-95A042 -- RV Motorhome BSD Kit

VS-95A042 Main

Key Features

  • RV Blind Spot For Motorhomes
  • Lane Change Alert (LCA)
  • Rear Cross Traffic Alert (RCTA)

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

RV Blind Spot For Motorhomes

  • Easy to mount on the motorhome exterior
  • Available with trailer in tow option
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 Tested for years of durability in the sun
  • Breakaway model available for extra wide applications
  • Automotive grade weathertight connectors and wiring

Lane Change Alert (LCA)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

Rear Cross Traffic Alert (RCTA)

  • An audible tone will be heard and the corresponding warning indicator lamp will flash when a pedestrian or vehicle is detected approaching resulting in an impact of approximately 2 seconds
  • The system is capable of monitoring the rear cross traffic zones up to a 60 ft range

Manuals / Guides

VS-95A042 — Motorhome BSD Kit
Install Guide – Download
Operations Guide – Download


Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your towable.

VS-95A042-E – RV Motorhome BSD Kit w/ 55ft cable ADI
VS-95A042-D – RV Motorhome BSD Kit w/ 40ft cable ADI
VS-95A042-C – RV Motorhome BSD Kit w/ 35ft cable ADI
VS-95A042-B – RV Motorhome BSD Kit w/ 30ft cable ADI
VS-95A042-A – RV Motorhome BSD Kit w/ 25ft cable ADI


Videos


VS-95A009 Featured

VS-95A009 -- RV Towable BSD Kit

VS-95A009

Key Features

  • RV Blind Spot For Trailers / Towables
  • Blind Spot Detection (BSD)
  • Lane Change Alert (LCA)

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

RV Blind Spot For Trailers / Towables

  • Easy to mount on the trailer exterior
  • Compatible with nearly any type of trailer including 5th wheeler
  • All parts are available as service parts for replacement if damaged
  • ASTM D4329 Tested for years of durability in the sun
  • Breakaway model available for extra wide applications
  • Automotive grade weathertight connectors and wiring

Blind Spot Detection (BSD) 

  • BSD is automatically activated when the vehicle exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with over 75 ft range
  • The warning indicator lamps will illuminate when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds
  • The CUB BSD system complies with the ISO 17387 Type 3 system standards

Lane Change Alert (LCA)

  • LCA is activated when the turn signals are used to make a lane change and when the vehicle speed exceeds 15 MPH
  • The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds
  • An audible tone will be heard and the warning indicator lamp with the corresponding turn signal will flash when a vehicle is within the warning zone or if there is a vehicle detected approaching at high speeds resulting in an impact of less than 2 seconds during the lane change

Manuals / Guides

VS-95A009 — RV Towable BSD Kit
Install Guide – Download
Operations Guide – Download


Specifications

There are multiple configurations available for different sizes. Please use the guide below to find the best fit for your towable.

VS-95A009E – RV Towable BSD Kit w/ 40ft cable ADI
VS-95A009D – RV Towable BSD Kit w/ 35ft cable ADI
VS-95A009C – RV Towable BSD Kit w/ 30ft cable ADI
VS-95A009B – RV Towable BSD Kit w/ 25ft cable ADI
VS-95A009A – RV Towable BSD Kit w/ 20ft cable ADI
VS-95A009 – RV Towable BSD Kit w/ 22ft cable ADI


Videos


BSS-MI Featured

BSS-MI -- Frameless Mirror with Auto Brightness Control

BSS-MI Frameless Mirror with Auto Brightness

Key Features

  • 4.3″ Frameless Mirror Monitors with Auto-Brightness Screen
  • 2 Video-In input with 1 Video auto-trigger for back-up camera
  • Detachable & Replaceable Mount
  • Universal mount (VSM-AV) mount included

Find a Local DealerNeed Help? Call Our Sales Team at 1-877-777-8811

Share using

Details

This edition to our Frameless mirror monitors is most exciting for us, having bridged the gap between our mirror monitors and blind spot detection solutions. The BSS-MI will give you small amber colored triangle symbols when a vehicle is approaching your blind spot when installed with any of our Radar Blind Spot Detection Kits. The ultra-high brightness TFT LCD screen is a perfect pair along with polished edges to give you a sleek, new, up to date look for just about any car. Please see our Radar Blind Spot Solutions to find what BSS kit best fits your needs. Aside having the visual alerts for vehicles approaching either blind spot the mirror has additional inputs on the video monitor that works great with our blind spot viewing cameras, or front facing solutions for tight parking spots or low parking curbs.


Manuals / Guides

BSS-MI — Frameless Mirror with Auto Brightness Control
Download


Specifications

Coming soon


In the Box

  • Frameless Mirror Monitor
  • Power Harness
  • Connection Cables – including inputs for BSS
  • Screws and Other Hardware
  • Owner’s Manual And Warranty Information


Videos