BSS2LPB — License Plate Bar Microwave Radar Blindspot Detection System
Key Features
- High Accuracy Digital Microwave Radar Technology
- Two LED indicators for visual warning
- Buzzer speaker for audio warning
- GPS Antenna Included for Speed Sensing
- No drilling or removal of bumper required
- Applicable for metal bumper vehicles (pickup trucks)
- Cross Traffic Alerts while Reversing
- Works On All Types Of Vehicles: Trucks, Cars, Vans, Commercial Vehicles
Share using
Details
BSS2LPB Radar Blind Spot “BAR” is based on microwave radar technology for extended distance and sensitivity. BSS2LPB adds an extra set of eyes and warns the driver if there are any vehicles approaching in either blind spot before and during a lane change maneuver.
Our system uses GPS to initiate operation above 20 MPH eliminating potential fault alerts. Unlike other systems, it requires no drilling or removal of vehicles bumpers. Radar Sensor “BAR” installs top or bottom of tag/license plate and alerts the driver with two compact LED Indicators mounted on the “A” Pillars and a small hideaway speaker.
This Microwave system is more accurate than previous ultrasonic based sensor solutions from other companies.
Kit also includes newly revised “Reverse Cross Traffic Alerts” for backing/reversing out of a tight space when visibility is limited while vehicles are approaching from left or right side.
Specifications
- Detection range
- 52 degree (Horizontal)
- Speed range
- 0.5mph—137mph
- Speed accuracy
- < 0.5mph
- Speed Restriction
- 1. The GPS needs to detect +20mph to activate the sensors
(there are 4 speed restriction option : 15 mph, 20 mph, 25 mph,30 mph. Default is 20mph).
2. If no GPS signal is detected or satellites not found, the system will be activated at any speed - Direction of movement/Alerts
- Alerts for Approaching Vehicles
- Detection range
- Truck : 1ft-80ft
Car : 1ft-65ft
Motorcycle:1ft-50ft
Pedestrian:1ft-45ft - Operating Voltage
- 9—18V
- Waterproof
- Radars: IP67 / Cables: NOT waterproof
- Working current
- < 100mA
- Working temperature
- -20°C ~ + 70℃
In the Box
- Main Unit
- Harness and Extension Cable
- BSS Bar with two sensors built inside
- LED Indicator Gray Housing
- LED Indicator Black Housing
- GPS Antenna
- Adjustable Buzzer
- Velcro
- Screws & L-Tool